 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| KESERIES INTRODUCTIONS HIGH PERFORMANCE IEC CONNECTOR FILTERS SPECIFICATIONS 1. Maximum leakage current each line-to-ground @ 115VAC 60Hz: 0.20mA @ 250VAC 50Hz: 0.40mA 2. Hipot rating (one minute) line-to-ground: 2250VDC line-to-line: 1450VDC 3. Operating frequency: 50/60Hz 4. Rated voltage: 115/250VAC V DE 1. Specially designed with ground choke providing most effective EMI suppression for high frequency noise (ranged 5MHz-25MHz). 2. Bleeder resistor can be added with suffix "-R" on part numbers. 3. With optional 3300pF Y capacitor instead of 2200pF. 4. With optional 0.1uF X capacitor instead of 0.047uF. 5. With optional solder lug connection instead of fast on terminal. 6. All part numbers are UL recongnized, CSA certified and VDE approved. COMPONENTS PART NO. 03KEEG3DA/03KEEW3DA * 08KEEG3DA/08KEEW3DA **10KEEG3DA/10KEEW3DA L (mH) Cx (uF) Cy (pF) Lg (uH) 3.1 0.8 0.047 2200 100 0.4 INSERTION LOSS (TYPICAL) 03KEEG3DA 08KEEG3DA 80 dB COMMON MODE COMMON MODE DIFF. MODE DIFF. MODE ** UL, CSA & VDE approved to 9A 115/250VAC * VDE approved to 6A 250V 10KEEG3DA 80 dB COMMON MODE DIFF. MODE MINIMUM INSERTION LOSS IN dB COMMON MODE (L-G) IN 50 OHM SYSTEM CURRENT FREQUENCY-MHz RATING .15 .50 1.0 5.0 10 3A 20 30 35 45 45 8A 10 15 45 40 40 10A 2 10 15 20 35 DIFFERENTIAL MODE (L-L) IN 50 OHM SYSTEM 3A 0 8 12 45 45 8A 0 5 12 40 40 10A 0 3 10 35 35 60 dB 60 dB 40 dB 40 dB 30 45 50 40 45 40 40 20 dB 20 dB 0 dB 10K 100K 1M 10M 0 dB 10K 100K 1M 10M ELECTRICAL SCHEMATIC L L I N E R Cx Cy L Cy MECHANICAL CONSTRUCTION N G L O A D L' N' G' Lg 0.13 3.3 R: 1M /-R ONLY 1.95 49.5 0.04 1.0 1.575 0.02 40.01 0.5 0.008 0.2 0.02 0.5 0.84MAX. 1 5 2 0.87 1.18 0.02 30.0 0.5 22.2 21.3MAX. 1.575 0.005 40.01 0.13 0.85 0.004 M3 1.12 28.45 +0.02 -0 +0.5 -0 2.34 59.5 1.79 45.5 2.18 55.5 1.12MAX. 28.4MAX. 0.04 1.0 G3D +0 R3.0 -3.0 +0 R0.12 -0.12 SUGGESTED MOUNTING CUTOUT G3D 1.95 0.04 49.5 1.0 0.13 0.008 3.3 0.2 1.575 0.02 40.01 0.5 0.87 0.02 22.2 0.5 0.84MAX. 1 5 2 1.18 0.02 30.0 0.5 21.3MAX. 1.575 0.005 40.01 0.13 0.85 0.004 M3 1.12 +0.02 -0 +0.5 21.6 0.1 2.02 0.04 51.5 1.0 1.87 47.5 1.12MAX. 28.4MAX. 0.04 1.0 28.45 -0 +0 R3.0 -3.0 +0 R0.12 -0.12 W3D 4.0 MIN. 100.0 MIN. SUGGESTED MOUNTING CUTOUT W3D 21.6 0.1 2-15 ALL WIRE LEADS 4.0" LONG MIN. UNIT: INCH mm |
Price & Availability of 03KEEG3DA
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |